Tag Archives: update

Jun26

An Accidental Re-do

Posted on June 26, 2014 by Dwelling On A Dime

On Wednesday, we had an electrician come over to do some work for us upstairs. My newly-redone hall table was right outside the main bathroom. I always try to provide water, coffee, or beer to anyone working on the house. Hubby set the glass of ice water on the table. Despite layers of poly and wax, the water bubbled the top layer and it peeled RIGHT off the table.

-_- Do you know how long those paint jobs take? They’re not something you can patch up! I allowed myself my momentary freakout and went back to the drawing board. The best idea I had for the top was to decoupage it. Emily Dickinson is one of my favorite poets, so I put her poetry on the top, using lots of regular glue, reinforcing the seams, and 3-4 heavy coats of poly. I added the side stencils and then hand painted the undertones of white and gold, sealing it when done. No need to worry about this finish coming off!

Not a bad save, I (actually) like something I did 🙂

Cost: Free (doesn’t get better than that).

If you’re a lover of the unrivaled, devastating beauty of words (as I am), familiarize yourself with Emily Dickinson. No one will ever surpass Robert Frost for me, but she’s way up there. Some of my favorites:

I had no time to hate, because
The grave would hinder me,
And life was not so ample I
Could finish enmity.

Nor had I time to love, but since
Some industry must be,
The little toil of love, I thought,
Was large enough for me.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Hope is the thing with feathers
That perches in the soul,
And sings the tune without the words,
And never stops at all,

And sweetest in the gale is heard;
And sore must be the storm
That could abash the little bird
That kept so many warm.

I've heard it in the chillest land,
And on the strangest sea;
Yet, never, in extremity,
It asked a crumb of me.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Behind Me — dips Eternity –

Before Me — Immortality –

Myself — the Term between –

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

And of course, my all-time favorite of hers:

If I can stop one heart from breaking,

I shall not live in vain;

If I can ease one life the aching,

Or cool one pain,

Or help one fainting robin

Unto his nest again,

I shall not live in vain.

– Emily Dickinson




Oh: I "met" my new classroom 2 days ago, and we like each other very much :-)
I look at it as my next blank canvas. 
From now on, I want my room to reflect me and I have to put my stamp on it. 
I'm already dreaming of projects for it, some are already in the works. 
I'm feeling so much more inspired and happy lately.
I love this photo only because it radiates that. 
Here I am in my new future "second home"! 
 

Lastly, this is unrelated and I know "Throwback Thursday" is a Facebook thing...
But I came across this photo of my 6th grade class trip.
Seeing the Twin Towers is always eerie, moving, and incredibly sad.
I remembered being so awed by their massive size.

Jun14

French & Sensibility

Posted on June 14, 2014 by Dwelling On A Dime

Standard

(See what I did there, bibliophiles and Jane Austen fans?!)

For the record, I came up here to the office to blog, and was greeted with this:

After coaxing him off with treats, I’m ready to go 🙂

I’ve got TWO projects to blog today 🙂 I’ll start with showing you the raw materials and starting costs. I found an awesome, thick pine trestle bench/end table at a thrift store. It was $7 and I had to have it! It was rustic and yet reminded me vaguely of a church pew.

The second piece is a nightstand that I got for free from one of my upcycle friends. I threw my back out getting it to my car, as it apparently is the heaviest nightstand on earth. The drawers were very swollen from the humidity and it needed a little work, but my goodness…those lines and details! I knew it would really be something when completed.

Here are my two “before” items:

(ignore the mirror. That’s something I am making pretty and into a chalkboard for my classroom).

See? Great lines and tons of potential on both.

I was not feeling bright or loud colors for these two beauties. I did, however, know I wanted to play around with stencils. I decided on a driftwood/sand color for the trestle table and a deep metallic grey/brown for the nightstand.

First up, the trestle table!

I painted the whole piece in white shabby paint, and then roughed it up heavily. In order to get the color I wanted, I used a dark antiquing wax, which gave me that pretty shade I wanted. I found stencils I really liked that gave the piece a French vibe and stenciled the designs on in darker brown. Here’s the first coat to paint:

Here’s the “after” waxing and stenciling:

It was finished here, technically. After looking at it again the following day, I wanted to tweak it, because I thought it was too distressed and I found the pattern of sanding distracting. After redoing pieces of it and then using white revax (varnish and wax) on it, I finally got my desired result:

SO happy with it now. I love it. How people overlook things like this, I will NEVER comprehend!

Now for piece #2, the freebie nightstand:

After a few days inside my house in the AC and some sanding along the drawer edges, the drawers worked again. It had no pulls, so I needed to tackle that too.

I decided that in order to achieve the color I was going for, I’d need a deep brown base in a flat color and a white top glaze.

For white glaze, I recently tried a product called white revax and it’s AMAZING! Seriously, it seals, protects, and glazes all at once. A little goes a long way and it’s something to keep on hand for any future projects. It’s also non-toxic, VOC free, and made in the USA (does it get any better than that?) You can read about it and buy it here:

https://shabbypaints.com/vax-revax/

For my base color, I went to Home Depot and chose a color from Behr’s Marquee line called “Well-Bred Brown”:

Let me tell you, this paint is un-freaking-believable. It goes on like butter! I definitely recommend this line, notable for its stain and dirt resistance. Here is the nightstand after its base coat:

Looks just like melted Hershey’s milk chocolate bars. Exactly the shade I was going for!

After this stage, I played around with the stencils and got this result:

I love the corner flourishes, and had to put a tiny fleur-de-lis on there on the front. The design at the bottom I painted by hand to bring it out. I accented the stenciled parts with a small hint of metallic gold acrylic paint.

I actually nixed drawer pulls in favor of knobs, despite the fact that pulls likely “go” better for the piece. I found just what I wanted at Anthropologie…gold, vintage-looking mercury glass knobs on clearance for $2.95 each. Perfect!

After sealing the brown paint with water-based poly, it was time to glaze it 🙂 After using the revax and adding my knobs, the job was done. Prepare for the photo blitz and cue “Isn’t She Lovely”:

SO HAPPY WITH IT! The brown with the white revax gave me just the color I wanted. slightly metallic grey-meets-brown. Love, love, love. Times a million.

Now for costs!

Project #1:

Trestle table: $7

Stencils: $2.40

Paints/sanding block/materials: Already on hand.

Total cost: $9.40

Project #2:

Nightstand: Free (thanks, Kelley!)

Sample can of Behr Marquee “Well-Bred Brown”: $3.94

Stencils: $2.40

Knobs: $2.95 each x 6 for a total of $17.70

Other poly/materials/brushes/revax: Already on hand.

Total: $24.04

How’s THAT for bargains?! I love them both and am so digging the French-inspired style lately. My ottoman makeover (previously blogged) bit me with the Parisian bug. So, see? All you need is some vision, and everything old becomes new again!

Til next time…

Jun12

Salvage Server (in with the old)

Posted on June 12, 2014 by Dwelling On A Dime

Standard

By now, anyone who knows me at all knows that my tiger oak “problem” is legendary. It’s one of my favorite things on earth. Painting it should be illegal and punishable by water torture. I’m not all that sure that I’m kidding when I say that…

ANYWAY!

I noticed that someone on my “upcycle/DIY” FB group listed a tiger oak dining table (round) that opens for a leaf. It was huge, something like ’56 round! Furthermore, it damn near weighed a ton (seriously). It was way too large to be used in its current state, and I would never part with my Carrara marble kitchen table. It was too beautiful to pass up for $20. I knew I had to find a way to re-purpose it before Jeff got home from work and threatened serving me with divorce papers (again)!

After walking my house and brainstorming with my best friend, I remembered that I’ve always wanted a server/buffet in the dining room, but I don’t have one. A server too big and chunky would take up too much room, as I already have a mahogany Queen Anne set that includes a table with 2 leaves, 6 chairs, a curio, a hutch, and an antique side table.

How to turn this massive table into a server? Cut it in half at the bias, where it breaks apart for the leaf! The edge would sit along the wall under the partition, coming out in a demilune/half-moon shape.

Then came the issue of what the heck could serve as the base. Hubby and I then recalled that in the very back of our storage room was the mahogany, Queen-Anne end table that we used as a coffee table and ate off at for 4.5 years at the apartment. Not only would it match the dining room set, but it also has sentimental value. The fact that the top was all sorts of beat up didn’t matter, since we’d be securing the top to it anyway.

The issue was that the server would sit too low. A trip out to the shed turned up old pieces of pressure-treated 2 x 4. When we stacked them (piecemeal style), the height became perfect. After that came a lot of pre-drilling, broken drillbits, loud noises, very long screws, and the task of securing them to the base. The remaining movement and slight rattling was fixed with shims.

I refused to risk long screws going up into the tiger oak top, because I was unwilling to risk a screw coming through the table top. When something is 100 years old with a perfect patina, it’s never as easy as wood putty, filler, and new stain. Instead, we used liberal amounts of contact adhesive. We put the top into place on the base and weighed it down heavily overnight. It’s now nice and secure!

I love the character of old pieces and wanted to make the server look its best without messing with that. I applied a small bit of stain to chips along the edges, and then made a homemade polish with white vinegar and olive oil, massaging it into the wood. This is literally all that was needed. Here is the end-result. If you like it, we have an extra base and the other half of the table if you’d like to make one. I’ll unload the supplies cheap, just let me know!

Here are some photos of the dining room, so you can see the lay of the land:

I LOVE this project. It was fast and easy with two people and it was a fun way to re-purpose an antique. I love it, and it will get plenty of us during dinners and parties. Not bad for $20!

Jun4

Roadside Rescue Makeover: ANOTHER Chair!

Posted on June 4, 2014 by Dwelling On A Dime

Standard

En route home the other night, my husband noticed (mere nanoseconds before I did) 2 chairs and a dining table at the curb by our neighborhood. I can spot quality a mile away, and what caught my eye first was a beautiful table base, country-looking and trestle-style. I typically get eye-rolls, loud sighs, and joking divorce threats when bringing salvaged furniture into my life/home, so I was shocked when he willingly turned the car around to look! There was a BEAUTIFUL, thick, high-quality dark pine dining table with two chairs. The chairs were lovely, with a finely-detailed Windsor design that was rustic and yet elegant. I needed one (naturally).

Whoever went home with the dining table is a lucky person indeed!

Shocker #2 was when my husband said “I think we can fit both in the car”. I had to make sure I heard him right! Being practical, I said we should take the better of the two chairs. So we went home with this beauty:

Oh, the potential! I do not like to refinish dark pine, and prefer painting it (not my usual). Looking at the details, I decided on a shabby paint job, but was torn between an oatmeal shade with antiquing wax like this $3 thrift store table makeover (I did this last week):

OR this robin’s egg blue shade that I used to make over my $0.50 salt and pepper mills:

The blue idea won out, mainly because it’s the final chair I could get away with squeezing into the hodgepodge/ quirky eat-in area! It’s softer than the screaming turquoise I used on the other chairs and I’ve been all about blue lately! That, and I had plenty of the paint left over, so I did not need to buy any supplies!

Here she is after being painted with the blue chalk paint:

See? Pretty even without being shabbied up!

After I took a sanding block to her, this was the result:

I had no clear furniture wax left, so in an effort to keep this project completely free, I used some semi-gloss water-based poly I had left over from the floors. I used this to seal it, since it would be expecting frequent use.

This was a TOTALLY free project! Free chair, leftover paint and poly, leftover paint brushes and sandpaper. It doesn’t get better than that!

Here it is in its “home”:

May30

“From that thrift shop down the road!”

Posted on May 30, 2014 by Dwelling On A Dime

Standard

I’ve had a very creative evening! I’ve been feeling extra inspired lately, and two oh-so-fabulous finds this week at my local thrift store were my muses 🙂

Item #1…a 24-inch wood stool for $1.95? YES! I am just under 5 feet in height, so this is perfect for me.

No artsy chalk paint job for this one! I decided to celebrate the start of (unofficial) summer by going with a hand-painted, summery, and colorful design. I chalk-painted the legs a Tiffany blue, but am considering doing an ombre blue design down the legs to add some color variance…we shall see. Here’s the end result:

I’ve always thought of myself as having absolutely no artistic ability, but I may need to rethink that one.

My second thrift store find was an AWESOME end table with a beautiful marble insert. It’s by Mersman Furniture, mid-century or so, and was screaming out to me for a makeover! Best of all…I got it for just under $3. I mean, honestly…how do you say no?! Here she is:

Look at those details!!

I decided on chalk paint, layered in oatmeal and white, and then a dark brown antiquing wax/glaze. I wanted the end result to resemble old wood or driftwood, but go nicely with the marble. Here’s the midway point, with the layered paint job (I had no white chalk paint left, so some white acrylic paint did the trick) and before the distressing:

Fun, but incomplete. I wanted the details to jump out and the color to darken. I took a sanding block to the piece to distress all the edges and details, and then (for the first time), I gave antiquing wax a try. The color I had was dark brown, and this is the brand I use (I also love their chalk paints, and you can get them for about $4 each after a coupon at Joann Fabric):

After taking a sanding block to the painted table for heavy distressing, I used a lint-free cloth to give the entire table a thorough wax coating, rubdown, and buffing. I was hooked and obsessed with this product from the first swipe…seriously, it’s great! I will use it on some other pieces.

Here are photos of the lovely end result of the table, some with flash for details, some in natural light.

I’m happy with my decision to let this table rock the shabby look. The color pairs nicely with the beige marble insert and is neutral. It will serve as an end table next to the chaise on my sectional. The marble means no coasters are needed! For my best friend, the sectional is the equivalent of “Sheldon’s Spot”, so she will probably get the most use out of it!

I paid just under $3 for the table, and used supplies I already had on hand to redo it.

::shakes head:: $3. Disbelief.

Here are my other fun finds from that trip (where I spent a whopping $8):

Fun, cute vintage enamel colander for $1

And a great tabletop ironing board (that matches our kitchen) for just $2…we really needed one, as our other one that we’ve had forever broke and bent in half:

Everything you see in this post cost me $8. Un-freaking-real. Thrifting/upcycling are a way of life for me. It’s recycling at its finest 😉

Until next time…

Feb13

Save the popcorn for the theater!

Posted on February 13, 2014 by Dwelling On A Dime

Standard

The following entry is NOT by me 🙂 It was (wonderfully) done by my lovely husband, Jeff, for instructables.com.

This is the original link: http://www.instructables.com/id/Removing-Popcorn-Ceilings/

I am posting it here because I love the difference it has made in our home. I came home from a bad day at work to the surprise of a new project for our house. Some girls like flowers, cards, and jewelry….I like home projects (and getting a little messy in the process). Next up is our 400 square-foot den, which will prove more of a challenge.

Here I am, covered in plaster after night #1 of “popcorngate”:

Without further ado, please join me in saying so-long to the popcorn ceilings in the foyer, dining room, and formal living room. Let’s leave the popcorn in the bag or the bowl, where it belongs!

I surprised my wife by having her walk in from a long day at work to find me covered in sloppy wet oatmeal-like popcorn ceiling plaster and the furniture all over the house, but she wasn’t mad and it turned out to be a very easy DIY project!***((Warning: Popcorn applied before 1978 MUST BE TESTED for asbestos and other chemicals common to the product in the 60’s/70’s. You do NOT want those fibers floating around the room to be ingested. If it’s asbestos based, you should have a professional come in to take care of it. Some municipalities have codes against you doing it yourself, for safety reasons.))***Popcorn ceilings were really popular back in the day, although many people had them sprayed on to hide defects in the ceiling, supposedly-deaden sound, or give that “cozy” appearance to a room that was a little too barren. Either way, I don’t believe that have any place in a modern home, and must be removed immediately!Ours was actually sprayed circa 2001, so it came off fairly easily and the ceiling drywall was already primed white above it, making it even more easy. Many times, you’ll find cracked Sheetrock, failed joint compound, edging tape coming loose etc. If any cracks are apparent, moistening some joint tape before applying to the crack, then compound over it until it’s smooth. It’s the best remedy – short of installing new drywall!Anyway, the process is simple.

Supplies list: (many of these items you may already own, keeping costs down)

Clear Tarps ($10)
Duct Tape ($5)
Blue Painter’s tape ($5)
Handheld pump sprayer ($15)
Bucket, Sponge and Soap ($15)
10″ Scraper ($7)
Silicone Caulk – ($4)
Stepstool ($25?)
Paint Pole, Roller, and Roller Covers ($15)
Ceiling Paint ($15 / gallon)
Spackle / Joint Compound ($5)
Sandpaper ($5)
Mask / Respirator ($15)
Joint Tape ($3)

Instructions:

1) Strip room of everything you can move. Certain sofas, tv stands, or heavy furniture are better off left where they sit, but all lamps etc. can go. It’s much easier to get to all corners with big things missing.

2) Tarp the entire room. Tape tarps together – ALL SEAMS- with duct tape, and use the painter’s tape to go at least a foot up the walls. Cover all electrical outlets and air registers, essentially creating a bowl-shape for the plaster to fall in to. Some people like to tarp the ENTIRE walls, but if you go slow, not much will glop onto them. It’s easy to clean up later anyway. The smallest seam between tarps will inadvertently cover the entire room in plaster dust.

2) Use the water sprayer to moisten a 5×5 foot box shape. You can spray the whole room if you want, but this stuff absorbs a ridiculous amount of water, so be aware before you begin. It’s hard to describe when it’s wet enough – but your scraper will slide through the “oatmeal” easily without leaving the Sheetrock very wet behind it. You can use paper towels to dry the Sheetrock if it’s really wet, and be sure to spray the popcorn directly. If you have many drips falling from the ceiling, it’s more than wet enough. You can honestly use your fingernails to test! Wear a mask and eye protection, even if you’re asbestos free. This stuff tastes like glue.

3) Use a file to smooth and curve the edges of your scraper so you don’t gauge the Sheetrock above the popcorn. This step isn’t necessary, but I’m glad I did! You could use a smaller (or larger) width scraper, but the 10″ was perfect for our application.

4) Get up on your stool and scrape away! Hold the scraper at a very low angle – almost parallel with the ceiling. The more angle, the more gouges you’ll risk. Push firmly, but if it fights you, add more water. Water is your friend! You can also use a paint roller dipped in warm water to apply if you don’t have a pump sprayer. You CAN scrape dry popcorn, but it’s a lot more work.

5) Be sure to keep all the oatmeal on your tarps, but be warned – it will be MESSY and SLIPPERY. I wore “crocs” type shoes to keep from stepping in it directly, and they’re easy to wash off. As the wet oatmeal dries, it turns back into a powder, which will get everywhere. Be sure to double tape your tarp seams.

6) Use a smaller putty knife to get the edges. If your room has molding, scrape against it. If not molding exists, scrape close, then use the sandpaper to get the edges. You may need a gritty sandpaper to get it done. Remember: water is your friend!

7) Bundle all tarps into themselves, overlapping, to keep major chunks from falling out. We did a poor job taping the seams, so dust and chunks got everywhere. On treated hardwood floors, a warm water bucket with citrus cleaner will do a nice job, and a shop-vacuum (wet / dry vac) gets the dust. It’s a good reason to move the furniture and clean behind!

8) Check for any repairs. We didn’t have much major repairs, but Spackle easily fills in the holes. Wait for it to dry, sand it flat and prime/paint over it. Use the sandpaper to smooth out any missed plaster or adhesive. Remember your mask and goggles… Use a damp (not wet) sponge and paper towels to wipe the ceilings smooth. Paint will not adhere to loose drywall dust!

9) Prime and Paint – Apply fresh tarps, no need to tape unless you feel so inclined. You may need 1/2 coats of primer if you’re painting plain stamped drywall, or if you’re using any other color other than white. I used the primer that was already applied, and put two heavy coats of ceiling paint on top. The paint roller pole was a little difficult to get used to, but applying a lot of pressure made the process go quickly. Wait for the coat to dry completely before “touching up” any areas. Ceiling paint is usually flat, and wet spots will look a bit awkward until it fully dries.

10) You may want to use a silicone caulk to clean up the edges where the ceiling meets the walls. In our application, our walls are actually painted-over wallpaper, so the edges were very rough. They may have applied an adhesive to the edges to keep the wet popcorn from peeling the paper during installation.

11) Throw away all tarps, examine progress for touch-ups, missed spots etc.

12) Clean and replace! Use the water bucket and mop, as well as a vaccum and dusting rag to give your rooms a really good clean. If you get plaster on carpet, use it as a reason to rip up all the carpet! 😀 You may have to vaccuum 47 times, wipe the glass 12 times and mop 125 times, but in the end it’s worth it. The hard part is over now.

13) If you’re replacing fixtures, fans etc, remember to remove the old ones first. Turn off the electricity at the circuit breaker and flip the wall switch off for extra insurance. If you’re not comfortable with the wiring, seek professional assistance. Do not spray this plaster with water, just grab some gritty sandpaper and get it done. No water should come anywhere near electrics, even with it shut off at the circuit breaker.

And that’s it! Obviously, tall or angled ceiling would be more difficult but for the cost, it’s a great thing to try yourself.

You’ll notice a LOT more light in each room, now that the millions of tiny shadows are gone, and you’ll insist your ceilings are a foot taller than they used to be.

Total times for 2 rooms and a hallway:

Wet, Scrape, Spackle = 2 Hours
Prime / Paint = 2-3 Hours
Cleanup / Replace = 2 Hours

Good luck and have fun! Be sure to blast music and invite friends over to help. It may not be perfect, but our motto became ‘anything’s better than popcorn!” and for us, that’s true. 😀

Jan31

A Touch of Retro (Paging the 1950’s!)

Posted on January 31, 2014 by Dwelling On A Dime

Standard

Hello, my precious little blog! I’ve missed this place. I’ve also missed having, you know…a life.

I’m always really inspired in the summertime, when I’ve got vacations on the brain and plenty of time to myself to get creative!

In the interest of beating the wintertime blues (as NJ has spontaneously morphed into an offshoot of Antarctica), I want to talk retro, I want to talk kitchens, and I want to talk 1950′s design elements. *cue Julie Andrews singing “My Favorite Things”*

They say style is cyclical. “They” are right! It seems that every number of years, things come back into vogue again. Maybe it’s just me, but I feel I am seeing this constantly with the 1950′s! ESPECIALLY when it comes to kitchens, so much of what is popular right now harkens back to this time period. I super-love the decor/design of the 50′s…from fashion to home design. I also have to say that while I did not set out or plan to add some 1950′s elements to my kitchen during the remodel, it definitely ended up that way.

Let’s go back in time a bit. I’m going to show you some ads and photos of 50′s kitchens so we have a baseline to work with:

Ahhh yes, the 50′s “kitchenbitch”. A true classic. What I find intriguing is the crisp, white look. This kitchen would not look out-of-place in a kitchen today!

I can’t tell you enough how much I adore this kitchen. the 50′s saw the rise of metal cabinets in fun colors, such as this Tiffany blue. The fridge just brings it all together. Look on the right and you’ll see the awesome stainless steel wall ovens…which are highly desirable right now.

Another “white cabinet” kitchen….this time with tea/green formica counters and an island *very trendy back then*.

50′s “Hotpoint” ad featuring their colorful wall oven. My obsession with the color aside, they are coming back in popularity. Notice something else? Check out the mosaic wall design. Flip the pattern horizontally and you have today’s tile backsplash. I always fly into an unnecessary rage when people buy an old kitchen with an awesome old wall oven and then RIP IT OUT. WHY?!

1950′s “pepto pink”. A true classic. Also popular in bathrooms and tile. Hey, this was the housewife’s domain, and if she wanted a pink kitchen, she got one!

This is an old Formica ad. It was the fashionable thing to have. Formica actually grew to NOT be a trend, as it was the go-to material for countertops for 50+ years! Today, most people want natural stone or some form of cement/silestone. What I also think is fun about the ad is that it features the great “retro red” pop of color so popular in this day (carried over from the 40′s).

Changing gears, this ad focuses on yellow accents (Formica and wall oven) but features wood cabinets with the classic 50′s hinges and hardware. Sweet wallpaper, no? *yikes*

When you really start to examine the photos, you can’t help but see eerie similarities to what is trending today! Every decade has its moment in the proverbial sun and its own particular nostalgia. However, something about the 50′s seem a little more lasting (and somehow still relevant).

Fast forward to 2014: A kitchen remodel is the most expensive (and sought after) home renovation. The trouble is that they’re so costly! To completely rebuilt a basic kitchen will easily cost you $30,000. A remodel on the higher end usually tops $50,000. I’ve discussed kitchens a few times before.This entry is more for those who don’t WANT to spend a small fortune, but if you’ve got a big budget, you can work with this information, too!

If you want something other than beige granite, stainless steel appliances, travertine backsplash, and darker wood cabinets…consider bringing one or more 50′s elements into your kitchen! You can do it in a big way or do it in a more subtle fashion. I personally feel it’s the most fun with color added, but hey…your call.

Whether you bought an older home and are working with what you have, or want your newer kitchen to travel back in time, here are some awesome renovated kitchens with elements borrowed from the 50′s:

The above kitchen is the stuff of my vintage fantasies! I love the painted cabinets, the hardware, the apron sink, and the removed cabinets on top to make room for open shelving that houses fun, colorful accents. The white subway tile backsplash keeps it simple but fits perfectly, and the white appliances are a perfect choice here. How much fun is that orange Kitchenaid?! These people get an A+++ from me! They took an older kitchen and redid it in a way that stays true to the era but *belongs* today, too.

Now, you may notice that the “before” photo is the “everykitchen” that is sought after today. It’s tasteful, it’s pretty, but it’s also rather anonymous. I love these people for their excellent and MUCH more fun “re-vamp”! They added shiny new stainless appliances (which are somehow a perfect modern-retro marriage), painted the cabinets white, chanegd the hardware to stainless steel, and (my favorite change), chalk-and-distress painted their pantry door. GENIUS! Perfect vintage touch! What is striking is how different the granite looks after the re-do…it’s the same counter-top, but the white, bright remodel changes its look.

Talk about preservation! These homeowners did a gorgeous job preserving the style and integrity of their 50′s kitchen while still creating something stylish and relevant. They kept and painted their original hardware and exposed hinges. They painted the original wood cabinets off-white. They kept their still-working wall ovens and old gas cooktop. The scallop details that frame the window are pretty and unique. The best thing they did was paint their old counters to an awesome matte black that “fits” perfectly. A re-vamp like this costs nearly nothing!

I want to feature the kitchen of a friend of mine (hi Kristen!), because she is a perfect example of the amazing transformation that countertop-painting can bring about!

I’m 100% being honest when I say I don’t think I have ever seen such a huge transformation for so little money. You may wonder what this has to do with “retro”? The elements are there in a subtle way, with the brightened cabinets and brand-new, glossy white appliances (white/glossy was big in the 50′s, as it looked crisp and clean). It looked awesome before she painted the counters, but painting them completed it all. It took time and elbow grease, but her “I may as well try it, anything is better than what I have” attitude paid off! The resulting lovely shade of grey is the perfect complement to her shiny new appliances and grey cabinets. The kitchen has taken on a more “French country” feel. Let this photo stand as a testament to the fact that a kitchen that looks completely different needn’t break the bank. If you have bad, ugly, or old countertops but don’t want to shell out thousands right now for new ones, get your paint on (make sure to seal it afterwards). You can go classic and elegant like Kristen did, or try out a fun pop of color. The best part? If you don’t like it, try another color :-) There are also countertop-refinishing/refacing kits you can buy specifically for this type of project.

Back to more 50′s/vintage inspiration:

These homeowners painted their old wood cabinets while keeping an original retro stove and backplash. They painted their island and left the green enamel top as-is. Not a fan of that, but hey…it works for them. The biggest problem in this kitchen is THE CLUTTER THAT MAKES MY BRAIN EXPLODE and the yellowed, cream microwave. That should be white, and this kitchen needs a good “organize”, because it’s otherwise charming.

Here’s just an example of how brightening up your kitchen space can take your layout from “wind tunnel” to “fresh, clean, and open”:

Their goldenrod accessories are a nice pop of color, too!

If you’re not doing an actual reno but want to add in a few fun 50′s elements, consider doing so with accessories! I’ve done some of this in my own kitchen and will add a few more soon.

The Bella company makes cooking/kitchen appliances in excellent colors with a vintage-feel:

(I am thinking of buying that toaster for my own kitchen. This line is affordable and accessible).

Another current trend is accessories that feel nostalgic:

(I am clearly partial to aqua blue. Please excuse my blatant bias!)

Appliances that feel vintage are gaining in popularity:

Fantastic microwave by Nostalgia Electrics.

How. Freaking. Genius. It’s literally a breakfast station…coffee, toast, and eggs/meat on the top griddle. All wrapped up in an inexpensive and whimsical package.

If you’ve got VERY deep pockets, you can outfit a kitchen in brand-new appliances that look vintage…by Big Chill:

(I adore the mint green!)

They’ll set you back $3,000 for the fridge, $4,000+ for the range, $600 for the microwave, $1,700 for the dishwasher, $1,400 for a vent hood, and $3,000 if you choose a wall oven. They are STUNNING, but my goodness…the prices raise my blood-pressure!

If you want affordable nostalgia, GE designed a line called “Artistry” which features a choice of black or white appliances that have a 50′s feel for VERY little money…you can easily get the whole kitchen full of appliances for about $2,000-$2,200, which is great!

I fully admit that if I was not set on stainless for the look I wanted, I’d have bought these in white, hands-down, no-contest.

Another easy way to add a vintage element is with a colorful and endlessly useful Kitchenaid mixer!

My hubby bought me this pale pink breast-cancer edition mixer…I named her “Loretta”:

In conclusion, don’t shy away from playing around with 50′s elements in your kitchen, because the results can be inspiring and fabulous! Remember that it doesn’t take a lot of money to DIY a kitchen from something cringeworthy to something you’re proud to show off. I’ve ALWAYS loved the style of the 1950′s…all my life. I did not realize I was going in that direction when we re-did our kitchen, but the end-result clearly shows a lean to vintage/retro. I leave you with a reminder of my kitchen “before and after”, that cost us a measly $2,500:

Now for our “accidental-50′s-inspired” after:

Don’t be afraid to play around with style! Do what inspires you and makes you happy, while remembering that there’s always room for 1950′s charm in some element or another. Until next time…

Nov17

Kitchen Phase 2: Mission Accomplished!

Posted on November 17, 2013 by Dwelling On A Dime

Standard

Our kitchen has come such a long way since we bought our house 6 months ago! It went from looking very 1970’s to sleek, beautiful, and fun. We got our appliances yesterday, so I wanted to show you the way everything looks, because this is the look that will stay for a very long time (until we tackle phase 3, which is knocking down a wall, having an island built, and having a mosaic backsplash put in).

As it stands, even without phase 3, the kitchen is officially fully updated!

Phase 1 involved a large amount of paint and a gargantuan amount of elbow grease, but it was also cheap! Yesterday, appliances went in…and though I can’t call that a “cheap” update, the price we paid for them was outstanding! When you see our kitchen photos from move-in day and from yesterday, you’ll be amazed at the transformation.

I talk often about “good bones” with a house, and I’ve said it numerous times about our kitchen. The layout was workable. There was an eat-in area. The 1995 oak cabinets were solid wood and in good enough shape to keep. They had Granite Transformations put in the counters, and the color was close enough to what we wanted that we decided to keep it. The beadboard on the walls was a plus, just ugly and unpainted. We had a good amount to “work with” and make better. Could we have ripped out the bulkhead, counters, backsplash, floor, beadboard, cabinets, etc? Sure! But I didn’t want to literally sink money into a major renovation. It works wonders for some, but the reality is that we’re both just too cheap and too DIY! 😉

I must say, my favorite “fix” was taking a shiny, oddly-textured early 90’s backsplash and painting it. It was shiny, white, oddly-textured linoleum and some tiles had weird beige bundles of flowers and wheat on them. I had the idea to try bonding primer and paint, and now the once-ugly backsplash matches our beautiful walls. It was a free update because we used the paint we had on hand, and I couldn’t be more pleased. If you don’t want to spend between $500-2000 (depending on your choices) for a new backsplash, consider this easy option.

I’ll walk you through the transformation of our kitchen from the time we first moved in up through today:

See? Good bones indeed, but in need of updates.

Here’s the result after we got our paint on and rid ourselves of the headache-inducing screaming yellow:

The walls looked a million times nicer with the blue-grey color, but that beadboard looked even worse. The solution?

SO. MUCH. BETTER.

Then we decided to paint our oak cabinets white:

Really brightened things up, didn’t it?!

Onto appliances…our dishwasher and fridge were from ’91 and the dishwasher and microwave from 2000 were both not working well. The fridge was shiny black, chrome, and had cream sides. 1 fridge, 3 colors. It drove me so crazy that we painted the sides with chalkboard paint to liven it up to be something I could live with until we could replace all the appliances at once:

I highly suggest that update!

As far as appliances go, let me preface it all by reminding you that I’m cheap. My husband is also cheap. I may have caviar taste and like nice things, but I’m cheap! We couldn’t bring ourselves to buy appliances until Black Friday sales began popping up, as that tends to yield the best deals. I know people who spent 4 grand or more on appliances, and the thought made my heart palpitate. I came up with a budget of $2,000 for the fridge, dishwasher, over-range microwave, and gas range. The goal was good, basic appliances. We knew stainless steel was the look we were going for (sleek and industrial). Our original black-and-gray-and-white kitchen idea morphed into something with many pops of teal blue and something a lot more fun… with a punch of personality!

Home Depot had a “Pre-Black Friday” ad out and I saw exactly what I wanted at the price I wanted to pay. Furthermore, we got no-interest for 6 months (I like paying $500 a month with no interest way better than paying in cash all at once), free delivery, free haul-away, and installation for $2,000 and some tax. We went with Frigidaire. I did the best measurements I could and the fridge ended up being slightly too tall for our “built when fridges were smaller” cabinets, so hubby made a few small cuts and the crisis was averted.

Anyway, we’re more than pleased with the look. The fridge is so much bigger than the last one! Luckily for my parents, my dad was in the garage when their older-than-me spare fridge sparked a small electrical fire and died or “took a crap” in the eloquent and elegant words of my dad. Our chalk-board-sided black fridge goes to them as their new spare 🙂

Once more with “before”:

And now, our current kitchen:

And of course, the fun and new eat-in-area highlighted in my last entry:

The best part of it all is that all of these updates combined cost us just $2,500 between lots of paint, elbow grease, salvaging items for free, a Craigslisted marble-top table and chairs, re-purposing current items, and appliances. It really doesn’t even look like the same kitchen. I couldn’t be happier, honestly. “The Anonymous Kitchen” is my pet-peeve (the same one everyone has, with the dark cabinets, tile backsplash, neutral walls, beige granite, and stainless appliances), and we have one that nobody else does thanks to DIY skills, imagination, and a very small amount of money (as kitchens go). “The Anonymous Kitchen” might be gorgeous, but this one looks and feels like us! I’m a “warm” person…so this is the first cool-toned room I’ve ever had or done. I enjoy that the kitchen has so much personality and stands alone from the rest of our home without clashing from the “feel” of it, thanks to the personalized touched and unique items.

::Happy warm-fuzzies::

Until next time…

Aug30

Bathroom Before & After

Posted on August 30, 2013 by Dwelling On A Dime

Standard

When we got this house, we did NOT like the bathroom. It was…well, to use a friend’s favorite adjective…tragic. It was as if the Jersey shore exploded in our tiny bathroom. I’m talking beachy-keen wallpaper, and border with very large shells on it. Also included were a dated vanity with bad fixtures and a floor comprised of a sheet of white linoleum with grooved squares. If the wallpaper wasn’t awful enough, it was 4 layers deep with one layer of wallpaper tacked on top of another, from the 60’s up through now.

Now for the *lovely* photos…

Not ideal.

With the shower being the exception, the bathroom ended up being a “gut”. The wallpaper over the years ruined the walls and could not be stripped without taking chunks of 1960’s drywall with it. We paid our contractor to re-drywall and paint the whole bathroom. We were not pleased, but felt it was better to have something done once and done right! We had mold/water resistant drywall put in to be safer. I was going to put a cool khaki color on the walls, but decided to use the very warm and brighter shade we used in the master.

We chose a white vanity by Allen & Roth with a matching medicine cabinet that is tall with a large mirror (not to mention a ton of storage). We picked out a brushed nickel light fixture with an interesting swirled design. We found a granite color that we love for the vanity top to complete the look. After choosing brushed nickel finishings for the faucet and toilet paper holder/towel rack, I found some great knobs for $2.95 each at Anthropologie. All else came from Lowe’s.

We just had the floor done with the porcelain tile that resembles wood, and our contractor made us a concrete/silestone room transition since a typical one wouldn’t fit (the room steps up from the hardwood in the hall). It looks like we laid driftwood in our bathroom, and the result is awesome! Neutral enough to keep indefinitely, even if we change out the decor colors in the future.

As for accessories, I fell in love with Croscill’s “mosaic leaves” collection, and got it all at Bed, Bath & Beyond with their 20% off coupons.

The result after the remodel is a bathroom that is warm, bright, fun, and really cheerful. It may be small, but it’s gorgeous and we enjoy it!

Here are the after photos:

So. Much. Better.

This was not a “cheap” project, really. But the end result still cost a lot less than many people I know have spent on their bathrooms. The breakdown is:

New drywall, framing out the door and the windows, new baseboards, new paint: $1500

New vanity, granite top, medicine cabinet, and light fixture: $644 (yep, that’s the exact amount).

New brushed nickel fixtures and finishes: $120

New knobs from Anthropologie: $15

New 6 panel door to replace the ugly and creepy slat door: $25

Bathroom accessories (including outlet covers, decal, painting, and wall art): $150.

Grand total: $2,300 rounded up.

	Mom on Best/Favorite Beauty Buys of…
	Mom on Best/Favorite Beauty Buys of…
	Penny on “From that thrift shop d…
	jmlol on An Accidental Re-do
	Dwelling On A Dime on An Accidental Re-do